BARIX Streaming Client Manuel d'utilisateur Page 11
- Page / 35
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
does not have to get a new IP address at power on or reboot.
IP Address
Enter the 4 values of the desired static IP address e.g.:
• “192.168.0.12” for an internal LAN
Attention: Make sure that you enter a free IP address. The device will check this and will not be
available until the device using the same IP is disconnected or switched off. The command Ping
can be used to ensure that a specific IP address is unused (i.e. No reply).
The automatic discovery functions are not executed if a Static IP address is set.
The automatic options are as follow:
• “0.0.0.0” for automatic discovery (Discovery order: BOOTP, DHCP, IPzator, AutoIP)
To enable automatic discovery but disable certain IP discovery functions set all but the third value
to zero.
For each function you want to disable add the value from the table below:
• “0.0.1.0” to disable AutoIP
• “0.0.2.0” to disable DHCP
• “0.0.4.0” to disable BOOTP
• “0.0.8.0” to disable IPzator
Examples:
• “0.0.3.0” disables AutoIP and DHCP
• “0.0.11.0” disables all but BOOTP
Attention: “0.0.15.0” disables all discovery functions which locks you out unless you reset the
device to factory defaults by pressing the reset button for about 10 seconds.
Netmask
Enter the 4 values of the desired Netmask e.g.:
• “0.0.0.0” for a default Netmask depending on the IP Address used
• “255.255.255.0” for a C class network
Note: Try first the Netmask your PC is set to or ask your Network Administrator.
11 Device Configuration
- User Manual 1
- Table of Contents 2
- 1 Introduction 5
- 6 Introduction 6
- 7 Introduction 7
- 2 Device Status and Control 8
- 3 Device Configuration 10
- 11 Device Configuration 11
- 12 Device Configuration 12
- 13 Device Configuration 13
- 14 Device Configuration 14
- 15 Device Configuration 15
- 16 Device Configuration 16
- 17 Device Configuration 17
- 18 Device Configuration 18
- 19 Device Configuration 19
- 20 Device Configuration 20
- 21 Device Configuration 21
- 22 Device Configuration 22
- 23 Device Configuration 23
- 24 Device Configuration 24
- 25 Device Configuration 25
- 26 Device Configuration 26
- Click the button 27
- 5 Rebooting the device 28
- 6 Rebooting the device 29
- 30 Rebooting the device 30
- 31 Rebooting the device 31
- 32 Rebooting the device 32
- 33 Rebooting the device 33
- 7 Dictionary 34
- 8 Legal Information 35
Produits connexes et manuels pour Mise en réseau BARIX Streaming Client
(23 pages)Sony DVP-NS930V manuály
Uživatelské manuály a uživatelské příručky pro DVD přehrávače Sony DVP-NS930V.
Poskytujeme 9 manuály pdf Sony DVP-NS930V ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Commentaires sur ces manuels